Philips 109F Скачать руководство пользователя страница 74

Страница: 74 / 133

Regulatory Information

RETURN TO TOP OF THE PAGE

Information for UK only

WARNING - THIS APPLIANCE MUST BE EARTHED.

Important:

This apparatus is supplied with an approved moulded 13A
plug. To change a fuse in this type of plug proceed as
follows:

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or
BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it
should be cut off and an appropriate 3-pin plug fitted in its
place.

If the mains plug contains a fuse, this should have a value
of 5A. If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 5A.

Note: The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in accordance
with the following code:

BLUE - "NEUTRAL" ("N")

file:///D|/EDFU/crt_19_5/edoc/english/109F/SAFETY/regs/regulat.htm (10 of 11)2005-04-21 ¤W¤È 09:36:34

Содержание 109F






































































































































Результаты поиска

Содержание 109F

Отзывы:

Похожие инструкции для 109F

Бренды по названию

Популярные бренды

Philips 109F, Электронное руководство пользователя

Результаты поиска

Содержание 109F

Отзывы:

Похожие инструкции для 109F

Бренды по названию

Популярные бренды