Philips 107T6, Руководство по обслуживанию

Страница: 71 / 100

16
107T6 CRT
71
4.5 Picture tilt
With respect to Fig. 3, Tilt to be measured on extremes of center line from bezel.
|A- B|:
£
2 mm
4. 6 Geometrical distortions (For preset modes only)
It is acceptable that pincushion, trapezoid, rhomboid,
rotation and various waves distortions must remain within
the limits of tolerance as in Fig. 4,
where A = B = 2.0 mm.
C = D = 2.0 mm.
The waviness of any vertical or horizontal shall be less than 1 .0 mm over a 50 mm distance.
4. 7 Image non-linearity (For preset modes only)
Apply cross-hatch pattern with
1 2 equal blocks along horizontal axis,
9 equal blocks along vertical axis. (see Fig. 1 )
Overall :
£
1 0 %
Adjacen:
£
6 %
Xmax. - Xmin
H. non-linearity = x 1 00%
(Xmax + Xmin)/2
Ymax. - Ymin
V. non-linearity = x 1 00%
(Ymax + Ymin)/2
4.8 Mis-convergence
The maximum convergence error to be measured on a white spot or white display line to
represents the maximum distance between the energy centers of any two primary colors
(See Fig. 6 ). For 3 1 .5kHz modes B Zone : 0.4mm.
CONVERGENCE SPEC.
Zones 0.25 mm CRT
Zone C 0. 1 5 mm
Zone A 0.25 mm
Zone B 0.35 mm
Go to cover page
GENERA L PROD U CT SPECIFICATION
BRAND : PHI L IPS
TYPE :
1 0 7 T 6 0/00
8639 000 15483
2004-04- 1 9
2004-04- 16
3 1 Wayne L in
17" V32 GS4 1 0 7 T 6 - 71K CMTR