14
107P2 CM 25 GSIII
OSD Adjustments (Continued)
To unlock (enable) OSD function:
- Press OSD button "
" for over 15 seconds again to unlock the
OSD function.
Release it, then OSD comes on the screen as below.
To lock (disable) OSD function:
- Press OSD button "
" for over 15 seconds to lock the OSD function.
Release it, then OSD comes on the screen as below.
ATTENTION
CONTROL MENU IS LOCKED
Disable the WARNING SIGNAL &
Access Service mode (burn in mode) :
To disable all the WARNING SIGNAL :
- Connect the Interface cable of the monitor (Monitor is ON.).
- If it is successful, then the signal "
"disappeared.
NO SIGNAL INPUT
NO SIGNAL INPUT
The WARNING SIGNAL of
:
appeared
screen again later.
-After disconnect the Interface cable of the monitor,then Monitor is powered ON.
- If it is successful, the signal "
" comes on the
NO SIGNAL INPUT
7) When the horizontal moire is adjusted, press the button to highlight
VERTICAL.
8) To adjust the vertical moire, press the or button.
9) When the vertical moire is adjusted, press the button to return to
the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be
highlighted.
After returning to MAIN CONTROLS . . .
. . . to exit completely, press the button.
CLOSE MAIN CONTROLS
Smart Help
-Leave "
MODE" :
.
burn in
burn in
Reconnect the interface cable to PC,
then the "
MODE" disappear.
- Disconnect the Interface cable of the monitor.
-
- If it is successful, the signal "
"
comes on the screen later.
(Background is white.).
Access Service Mode & Burn in mode
Firstly, get into Factory Adjustment Mode.
Push LEFT
& RIGHT
buttons at the same time for
over 15 seconds and release them.
The factory message appears at the bottom of the
main OSD menu. (for example :107PVE V1.44 000427 ;
00195 is
M.T.B.F. in HOUR unit)
SERVICE MODE
SERIAL NO: TY 123456
HOURS : 00021
FACTORY VER 1.01 990706
107PVE V1.44 000427
00195
Push LEFT
& RIGHT
buttons at the same time,then power ON.
- In the beginning of service mode
(full white pattern), the monitor
will working at 48kHz of horizontal
frequency,after 55 seconds, it will
switch to 81kHz automatically,
then change mode between
two modes constantly every 55 seconds.