Philips 107E61/00, Руководство по обслуживанию, Страница: 19 / 85

107E6 CRT
Go to cover page
19
ISP (In System Program)
Step 5: Upgrade the firmware
Choose all the items of the Programming commands, then click
"AUTO (Run All Selected)", the software will upgrade the firmware,
the LED will extinguish several seconds, after finished the upgrade,
the monitor will stand-up automatically. Bring up the window as
shown in Fig. 18,which means you have finished the upgrade
successfully.
Fig. 18
Turn off the monitor, then press and simultaneously till
the LED light, then press button, bring up MAIN CONTROLS.
You will find, after upgrade, the version have already changed
Factory
Mode-------------
Indicator
Turn off the monitor to exit the factory mode.
Fig. 19
As Shown in Fig. 19.
Click"Quit Program", quit the program.
3. Click Bootcode-string, choose the third row and input the
following codes ''0x6e, 0x42, 0x41, 0x43, 0x4b, 4x74, 0x6f,
0x42, 0x4f, 0x4f, 0x54'', then click ''close window''.
4. Click ''load file'', bring up the following window as shown in Fig 11.
(Fig. 10)
Fig. 10
5. Choose the Demic. Hex from C:\107E6, the left side of the window
will show the file name"313811707142...hex", click "3138117...hex"
of the left side of the window, then click "Load file",shown as Fig. 12.
Fig. 11
Fig. 12