40
CLEANING AND MAINTENANCE
The milk container and the cappuccinatore have been designed to optimize the milk froth.
Thorough cleaning and maintenance of the milk container and cappuccinatore will allow you to savour
excellent milk-based beverages.
It is recommended to rinse the cappuccinatore before the fi rst daily dispensing of milk-based
products and however to wash it thoroughly at least once a week.
MILK CONTAINER MAINTENANCE AND CLEANING
Pour any extra milk into a
container.
QUICK MAINTENANCE OF THE CAPPUCCINATORE
If you notice a reduction in the milk froth, simply turn the fl ow regulator
as shown in the fi gure.
Turn the regulator 2-3 times to perform quick maintenance.
Note: if the adjusting device installed is missing, replace it with the
adjusting device supplied with the cappuccinatore maintenance kit.
Rinse all the parts in contact with
milk with lukewarm water.
1
2
3
Dry and replace the milk
container into the compartment.
WASHING TO STORE THE CONTAINER IN THE MACHINE
After using milk to prepare beverages, the container may be stored in the machine only if it has been
washed with fresh drinking water. These few simple steps guarantee that the machine will operate properly.
MAINTENANCE OF O-RING FOR MILK CONTAINER
In the machine there is an O-ring which guarantees the correct
operation of the milk container.
Every 6 months, remove the water tank, open the milk container and
lubricate the O-ring using the grease supplied with the machine.
The grease for the Brew Group’s lubrication may be purchased in
authorized service centres.
