Philips AVENT SCF902, Руководство пользователя

Страница: 11 / 32

10 EN
Note
•
You do not need to use the deepest
suction mode, only use the modes that are
comfortable for you.
4
When you have finished expressing,
press the on/off button to switch
off your pump. Carefully remove the
pump body from your breast.
5
Disconnect the the power plug
to the power socket, and then
disconnect the power adapter from
the pump motor.
5
6
Unscrew the bottle from the pump
body ready for feeding or storage.
Clean the other used parts of
the breast pump according to the
instructions in chapter “Clean and
Sterilize”.
Caution
•
Do not continue pumping for more than
5 minutes at a time if there is no result. Try
expressing at another time during the day.
•
If the process becomes very uncomfortable
or painful, stop using the pump, and consult
your breastfeeding advisor.
•
Never tilt the breast pump when the milk
has reached the maximum line on the
bottle. Replace with a new bottle before
re-pumping to avoid spillage.
Note
•
If you can express more than 120 ml each
time, use the 240ml Philips AVENT milk
bottle for storage to avoid spillage.
•
If the breast pump is on but there is no
operation for 30 minutes, it will automatically
shut down.
Tip
•
Place the pump motor on a stable and
flat surface, or hang up steadily with the
included sling, to avoid any accidental drops
when in use. If not, this may pull the pump
body off from the breast and cause injury.
To pause pumping
This breast pump has a pause function,
and you can press the pause button
to pause pumping if at any time
the suction becomes uncomfortable,
there is a need to change the bottle,
reposition the pump on the breast, or
change side.
1
When the breast bump is in a
particular suction mode, press pause
button will pause the pumping.
»
The respective light will flash to
remind you of the selected suction
mode.
1
English