Tank-Monitor VTM
REV 1A – FEB 2020 - Software Version 1.0
page 3
•
Ultra sonic sensor
UTV 20-80
Order-No.: 7 0219 35xx
recommended accessories for ultrasonic transmitters:
•
Focus tube
UFT 40 (40cm long)
Order-No.: 7 0219 9400
•
Focus tube
UFT 80 (80cm long)
Order-No.: 7 0219 9800
•
Spacer ring
UTS 25 (25mm height)
Order-No.: 7 0219 9025
•
Fuse holder incl. Fuse 1A
f
o
r measurement lines
ASH1A
Order-No.: 6 0030 3411
1.3 Warranty
Warranty is granted for a period of two years from the date of purchase. Defects as a result
Material or manufacturing defects are eliminated free of charge if:
• The device is sent to the manufacturer free of charge.
• The proof of purchase is enclosed
• The device has been treated and used as intended.
• No foreign spare parts have been installed or interference has been made.
Excluded from the guarantee are damages caused by:
• Overvoltage at the inputs or incorrect connection
• Liquids spilled into the device or oxidation due to condensation
• Lightning strike
Not covered by the warranty are consequential costs and natural wear.
When asserting claims under warranty and warranty, a detailed description of the defect is essential.
Detailed instructions facilitate and speed up the processing. Please understand that we cannot
accept shipments that are not free.
1.4 Disclaimer
Both the compliance with the operating instructions and the conditions and methods for installation,
operation, use and maintenance of the tank monitor VTM cannot be monitored by philippi
elektrische systeme gmbh. Therefore, we assume no responsibility or liability for any loss, damage
or expense resulting from improper installation or improper operation.
1.5 Quality assurance
During production and assembly, the devices undergo several checks and tests. Fabrication, checks
and tests are carried out according to established protocols. Each device has its own serial number.
Never remove the nameplate. The assembly and the test of all devices are carried out completely in
our facilities.
