3 in 1 Multi Sensor
PST07
PST07-A PST07-B
PST07-C PST07-D
The multi-sensor PST07 has PIR, temperature and light sensors
function in one, based on Z-Wave
TM
technology.
The multi sensor is a Z-Wave
TM
enabled device which is fully compatible
with any Z-Wave
TM
enabled network. This device is a security enabled
Z-Wave Plus product that is able to use encrypted Z-Wave Plus
messages to communicate to other security enabled Z-Wave Plus
products. Z-Wave
TM
enabled devices displaying the Z-Wave
TM
logo can
also be used with it regardless of the manufacturer, and ours can also
be used in other manufacturer’s Z-Wave
TM
enabled networks.
The product supports Over The Air(OTA) feature for the products
firmware upgrade.
This product can be included and operated in any Z-Wave
TM
network
with other Z-Wave
TM
certified devices from other manufacturers and/or
other applications. All non-battery operated nodes within the network
will act as repeaters regardless of vendor to increase reliability of the
network.
The device adopt the Z-Wave
TM
500 series chip, when your Z-Wave
TM
network system is all made by Z-Wave
TM
500 series devices. The
network system will have the advantages as below.
•
Concurrent multi-channel support reduces external interference.
•
Better RF range, improve about 10 meters in indoor.
•
Support 100 Kbps transmit speed, speed up communication.
Specification
Rated
DC3V (CR123A)
RF distance
Min. 40M indoor,
100M outdoor line of sight,
RF Frequency
868.40 MHz, 869.85 MHz(EU)
1
