Troubleshooting
Symptom
Cause of Failure Recommendation
The switch on/off
function not working
and LED off
1. Battery is
running out of
power
2. Wrong function
mode
1. Charging the battery by
Micro USB.
2. Pointing the arrowhead
to area B and press the
touch button.
3. If the device still can
work, don’t open up the
Switch and send it for
repair.
Can not adjust the
percentage of
dimmer
1. The device may
not be placed
upright.
2. The device is in
off state.
1. Check if the device is
placed upright.
2. Rotating to the
percentage you want
then press touch button.
Or pointing the
arrowhead to area B and
press the touch button
to turn the lamp on then
adjust the percentage.
The device can not
join to Z-Wave
network
1. The device may
in a Z-Wave
network.
2. The arrowhead
points to wrong
area.
1. Exclude the device then
include again.
2. Pointing the arrowhead
to area A then include
again.
Button no response 1. The button will
no response
when LED is
flashing.
Wait for the LED go out
and try again.
For Instruction to http://
www.philio-tech.com
Overview
2
