Philio PAU01 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 12

Philio PAU01 Скачать руководство пользователя страница 11

You can choose send the NOP command or the basic command.

The interval field is for setting the interval time between each
command.

The repeat field is for setting how many commands will be sent.

Figure

18

Using the basic command

If you choose the basic command, you also can choose the basic
value.

On: 255

Max: 99

Off: 0

Click the “start” button to start the testing. There are two way to
trigger the consistent test. One is let the device send out the
NIF(Node Information), another is select the device from the left side
“Device List”, and the presss the “Manual” button. When the consistent
test start, the controller will consistently to send the command to the
device. And also calculate the count of the sent command and the
response acknowledge.

Figure

19

Start testing

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide   reasonable   protection   against   harmful   interference   in   a   residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference   to   radio   communications.   However,     there   is   no   guarantee   that
interference will not occur in a particular installation.   If this equipment does cause
harmful   interference   to   radio   or   television   reception,   which   can   be   determined   by
turning   the   equipment   off   and   on,     the   user   is   encouraged   to   try   to   correct   the
interference by one of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

11

«
...
9
10
11
12
»

Содержание PAU01













Отзывы:

Нет отзывов