Figure
14
Check the options
Select the command type that you want to send, and fill the
arguments. Each command has define different arguments, Please
refer to the Z-Wave SDK to get more detail specification.
Some command type there is a number in the head that means the
version of that command type. 2 means version 2.
At the end, click the send button to send out the command. Some
command types will response the report. So the “Report Form” will
pop up. please refer to the “
8 Report Form”
.
6. Consistent Test
This page is for test the RF command is send to the device correctly.
Figure
16
Consistent Test Page
You can do some settings by press the “settings” button.
Figure
17
Consistent Setting
10
Figure 15 Select the command type