13/10/2019
manual.zwave.eu/backend/make.php?lang=en&sku=PHIEPAT02-B
manual.zwave.eu/backend/make.php?lang=en&sku=PHIEPAT02-B
2/7
1. Pressing tamper key four times within 1.5 seconds and do not release the tamper key in the 4th pressed, and the LED will light ON.
2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the tamper key. If successful, the LED will light ON one second. Otherwise, the
LED will flash once.
3. IDs are excluded and all settings will reset to factory default.
Safety Warning for Batteries
The product contains batteries. Please remove the batteries when the device is not used. Do not mix batteries of different charging level or different brands.
Installation
Battery Installation
When the device report the low battery message. The user should replace the battery to new one. The battery type is CR123A, 3.0V. The way to open the front
cover please press the top position, to release the cover.
Replace the new battery and install the cover back.
1. Put the front cover bottom, and press down.
2. Push the front cover top.
