7
4. Firmware update over the air (OTA)
PAN35 is based on 700 series SoC and supports Firmware Update Command
Class, it can receives the updated firmware image sent by controller via the Z-Wave
RF media. It is a helpful and convenient way to improve some function if needed.
5. Command Classes
The Switch supports Command Classes including…
Command Class
Version
Required Security Class
Z-Wave Plus Info
2
None
Security 0
1
None
Security 2
1
None
Supervision
1
None
Transport Service
2
None
Association
2
Highest granted Security Class
Association Group
Information
3
Highest granted Security Class
Basic
2
Highest granted Security Class
Binary Switch
2
Highest granted Security Class
Configuration
4
Highest granted Security Class
Device Reset Locally
1
Highest granted Security Class
Firmware Update Meta Data
5
Highest granted Security Class
Indicator
3
Highest granted Security Class
Manufacturer Specific
2
Highest granted Security Class
Multi Channel Association
3
Highest granted Security Class
Multi Channel Command
4
Highest granted Security Class
Notification
8
Highest granted Security Class
Powerlevel
1
Highest granted Security Class
Version
3
Highest granted Security Class
Disposal
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to
the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Philio Technology Corporation
8F.,No.653-2, Zhongzheng Rd., Xinzhuang Dist., New Taipei City 24257,Taiwan(R.O.C)
www.philio-tech.com
FCC Interference Statement
This equipment has been tested and found to comply with the limit’s for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
