5
PROJECTION ALARM CLOCK RADIO - User Guide
www.philex.com
5 Setting the time: Press the BACKWARD
<
(11) to set the hour and
FORWARD button
>
(12) to set the minute, press SET (10) to
confirm.
Listening to the FM radio
Before switching on the radio make sure the antenna (18) is unrolled
and fully extended.
1. Press the POWER button (15) to turn on the radio.
2. Press the BACKWARD
<
(11) or FORWARD button
>
(12) to adjust
the frequency.
3. Press and hold the BACKWARD
<
(11) or FORWARD button
>
(12)
to automatically tune to the next available FM station.
4. Press the button
(14) to increase the volume, press
the Volume - button (13) to reduce the volume.
5. Press the POWER button (15) to turn off the radio.
Setting preset stations
You can store up to 10 preset stations.
1. First tune to a station.
2. Press and hold the MEM/M+ button (10) until “P01” (or the next
available preset slot) shows on the display.
3. Press the BACKWARD
<
(11) or FORWARD button
>
(12) to select
a preset number (P01-P10).
4. Press the MEM/M+ button (10) button to confirm. The preset
station has been set up.
5. Press the MEM/M+ button (10) repeatedly while listening to
the radio to select a preset station. Alternatively, press the MEM/
M+ button (10) once and then press the BACKWARD
<
(11) or
FORWARD button
>
(12) to select a preset station.
Using the alarm function
Setting alarms
You can have two alarms set at any one time. To set the alarms:
1. In standby mode, press and hold (for 2 seconds) the ALARM 1
(13) or ALARM 2 (14) button to enter the alarm setting mode.
2. Then press the ALARM 1 (13) or ALARM 2 (14) button
repeatedly to cycle through the setting options:
Alarm time
>
Alarm sound source
>
Alarm frequency
3. To set alarm time: Press the BACKWARD
<
(11) to set the hour
and FORWARD button
>
(12) to set the minute. Then press the
