Setup
– 8 –
EN
1
Turn on the TV and set it to channel 3.
• If channel 3 has been already occupied for broadcasting,
see “RF Output Channel” section on page 6.
2
Select your language when turning this unit on for the first time.
Then press
[
B
]
to go to next step.
3
Press
[
B
]
to start Auto Set Up.
or
STANDBY-ON
1
Press
[MENU]
to select “CHANNEL SET UP”.
Then press
[
B
]
to go to next step.
2
Select “MANUAL SET UP”.
Then press
[
B
]
to go to next step.
3
Select the channel to be added or deleted.
4
Select “ADD” or “DELETE”.
5
To exit the menu
1
Press
[MENU]
and select “CLOCK SET”.
Then press
[
B
]
to go to next step.
2
Select the current month.
Then press
[
B
]
to go to next step.
3
Select the current day.
Then press
[
B
]
to go to next step.
4
Select the current year.
Then press
[
B
]
to go to next step.
5
Select the current hour.
Then press
[
B
]
to go to next step.
6
Select the current minute.
Then press
[
B
]
to go to next step.
7
Select “AM” or “PM”.
8
To exit the CLOCK SET screen
To Preset the Channel Again
1) Press
[MENU]
until the main menu appears.
2) Select “CHANNEL SET UP” by using
[
K/
/
L
]
, then press [
B
].
3) Select “AUTO SET UP” by using
[
K/
/
L
]
, then press [
B
]. After
scanning, the tuner stops on the lowest memorized channel.
To Change the On-Screen Language
1) Press
[MENU]
until the main menu appears.
2) Select “LANGUAGE SELECT”
by using
[
K
/
L
]
, then
press
[
B
]
.
3) Select
“
ENGLISH
” , “
FRANCAIS
”
or
“
ESPAÑOL
”
by
using
[
K
/
L
]
then press
[CLEAR/C.RESET]
.
To Select a Channel
You can select a channel by using
the
Number buttons
or
[
SKIP/CH.
G
/
K
,
H
/
L
]
.
Notes for using the Number buttons:
• When selecting cable channels which are higher than 99,
enter channel numbers as a three-digit number. (for exam-
ple: 117, press
[1], [1], [7]
)
• You must precede single-digit channel numbers with a zero.
(for example: 02, 03, 04 and so on)
• If the clock is not set, the CLOCK SET screen appears when
you press
[MENU]
. In this case, go to step 2.
CLEAR/
C. RESET
Preparation for Use
Hint
• Repeat these steps only if either there was a power failure or this
unit has been unplugged for more than 30 seconds.
No
Please wait for a few minutes.
After scanning...
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH.
G
/
//K
,
H
/
/L
]
(or
[CHANNEL
K/
/
/L
]
).
• If “AUTO SET UP” appears on the TV screen again, check the
cable connections. Then, press
[
B
]
once again.
Yes
Press
[MENU]
to exit.
• Refer to “Hint for Cable Box or Satellite Box” section on page 6.
Do you connect the cable from the cable box or the satellite box to
the unit’s ANT-IN jack?
Hint
• To go back one step, press
[
s
]
(during steps 2 to 7).
• Your clock setting will be lost if either there is a power failure or this
unit has been unplugged for more than 30 seconds.
or
or
MENU
or
or
or
or
or
or
MENU
or
• If the clock is not set, the “CLOCK SET” screen appears when
you press
[MENU]
. In this case, press
[MENU]
again.
LANGUAGE SELECT
B
ENGLISH
[ON]
FRANCAIS
ESPAÑOL
CH 01
AUTO SET UP
- M E N U -
TIMER
PROGRAMMING
AUTO REPEAT [OFF]
B
CHANNEL SET UP
CLOCK
SET
LANGUAGE
SELECT
CHANNEL SET UP
AUTO SET UP
B
MANUAL SET UP
MANUAL SET UP
CHANNEL 30
(CATV)
ADD
MANUAL SET UP
CHANNEL 30
(CATV)
DELETE
- M E N U -
TIMER
PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B
CLOCK SET
LANGUAGE
SELECT
CLOCK SET
MONTH DAY
YEAR
1 0 / – –
– – – –
HOUR MINUTE
AM/PM
– – : – –
– –
CLOCK SET
MONTH DAY
YEAR
1 0 / 0 2
– – – –
HOUR MINUTE
AM/PM
– – : – –
– –
CLOCK SET
MONTH DAY
YEAR
1 0 / 0 2
2 0 0 6
HOUR MINUTE
AM/PM
– – : – –
– –
CLOCK SET
MONTH DAY
YEAR
1 0 / 0 2 MON 2 0 0 6
HOUR MINUTE
AM/PM
0 5 : – –
– –
CLOCK SET
MONTH DAY
YEAR
1 0 / 0 2 MON 2 0 0 6
HOUR MINUTE
AM/PM
0 5 : 4 0
– –
CLOCK SET
MONTH DAY
YEAR
1 0 / 0 2 MON 2 0 0 6
HOUR MINUTE
AM/PM
0 5 : 4 0
P M AM
B
PM
or
or
or
or
NO
YES
Turn on the Unit for the First Time
VCR
VCR
Clock Setup
VCR
VCR
Operation described in this manual are
mainly based on the remote control.
Hint
• If you accidentally select Spanish or French and need English: Press
[MENU]
and choose SELEC. IDIOMA or SELECTION LANGUE.
Press
[
B
]
and select ENGLISH. Finally, press
[CLEAR/C.RESET]
.
• To add or delete channels in this unit,
[SKIP/CH.
G
/
K
,
H
/
L
]
button works on the channel number memorized in this unit,
[
K
/
L
]
works on all.
To Add or Delete Channels
VCR
VCR
