Philco PTL 2352, Руководство пользователя

Страница: 6 / 18

EN - 4
08/2016 Copyright © 2016, Fast ČR, a. s.
PART 3: INSTALLATION
Location
When selecting a position for your unit you should make sure the fl oor is fl at and fi rm, and the room is well
ventilated. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator.
Also avoid direct sunlight as it may increase the electrical consumption. Extreme cold ambient temperatures
may also cause the unit not to perform properly. This unit is not designed for use in an outdoor installation. Do
not drape the unit with any covering.
When installing the unit, ensure that 10cm of free space is left at both sides, 10cm at the rear and 30 cm at the
top of the unit. This will allow cold air to circulate around the wine cooler and improve the effi
ciency of the
cooling process.
Reversing the door swing
Tools Required: Phillips style screwdriver / Flat blated screwdriver / Hexagonal spanner
1) Remove the right top hinge cover.
right top hinge cover
2) Remove the screws fi xed the top-hinge with cross-slot screwdriver.
two screws