Philco PTL 1772 EBI, Руководство пользователя

Страница: 19 / 84

Copyright © 2020, Fast ČR, a. s. Revision 10/2020
EN - 17
PART 7: BEFORE CALLING YOUR AFTER SALES SERVICE
Alarm
indicator led
is turning on ERROR TYPE WHY WHAT TO DO
„Failure Warning"
There is/are some part(s) Out
of order or there is a failure in
cooling process.
The product is plugged for
the first time or a long-time
power interruption for 1 hour.
Check the door is open or
not and check if the product
working 1 hour. If the door is
not open and the product had
worked 1 hour, call service for
assistance as soon as possible.
If your fridge is not working properly, it may be a minor problem, therefore check the following, before calling
an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected,
• The socket is not sufficient. To check this, plug in another appliance that you know which is working into
the same socket.
What to do if your appliance performs poorly;
Check that;
• You have not overloaded the appliance,
• The fridge temperature set to 2.
• The door is closed perfectly,
• There is no dust on the condenser,
• There is enough place at the rear and side walls.
If your fridge is operating too loudly;
Normal Noises
Cracking (Ice cracking) Noise:
• During automatic defrosting.
• When the appliance is cooled or warmed (due to expansion of appliance material).
Short cracking:
Heard when the thermostat switches the compressor on/ off.
Compressor noise: Normal motor noise. This noise means that the compressor operates normally
Compressor may cause more noise for a short time when it is activated.
Bubbling noise and splash:
This noise is caused by the flow of the refrigerant in the tubes of the system.
Water flow noise:
Normal flow noise of water flowing to the evaporation container during defrosting.
This noise can be heard during defrosting.
Air Blow Noise: Normal fan noise. This noise can be heard in No-Frost freezer during normal operation of the
system due to the circulation of air.
If the edges of fridge cabinet that the door joint contact are warm;
Especially in summer (hot weather), the surfaces that the joint contact may get warmer during the operation
of the compressor, this is normal.