
Copyright © 2019, Fast ČR, a. s.
Revision 09/2021
EN - 11
PART 2: FIRST USE AND INSTALLATION
Cleaning before use
•
Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm
water and some neutral soap so as to remove the typical smell of a brand new product, then dry
thoroughly.
Important!
Do not use detergents or abrasive powders, as these will damage the finish.
Important!
It is necessary to have good ventilation around the refrigerator to allow for the
dissipation of heat, high efficiency, and low power consumption.For this reason,
sufficiently cleared space should be available around the refrigerator. It is advisable
for there to be 50- 70mm separating the back of the refrigerator to the wall at least
100mm of space on its two sides, a height of over 100mm from its top and a clear
space in front to allow the doors to open 180°.
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the low rear section of
the appliance, as poor air circulation can affect performance. Built-in appliances should be positioned away
from heat sources such as heaters and direct sunlight.
100mm
100mm
PP
Installation Positioning
Warning!
Before installing, read the instruction carefully for your safety and correct operation
of the appliance.
Содержание PTB 91 FW
