Philco PRF-530W/4A+, Руководство пользователя

Страница: 19 / 28

13
INSTALLATION
Installing Your Refrigerator
This appliance is designed to be free standing only, and should not be recessed or built -
in.
Place your refrigerator on a floor that is strong enough to support the refrigerator when it is
fully loaded.
Allow 5 inches of space between the back and sides of the refrigerator, which allows the
proper air ventilation. Adjust the feet to keep the refrigerator level.
Locate the refrigerator away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Ambient temperature below 16
°C or above 32°C will
hinder the performance of this appliance. This unit is not designed for use in a garage or
any other outside installation.
Avoid locating the refrigerator in moist areas.
Plug the refrigerator into dedicated, properly installed -grounded wall outlet. Do not under
any circumstances cut or remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be directed toward a certified
electrician or an authorized service center. This unit is no t designed to be installed in an
RV or used with an inverter.
After plugging the appliance into a wall outlet, turn the unit on and allow the unit to cool
down for 2~3 hours under before placing food in the refrigerator or freezer compartment.
Leveling the Fridge/Freezer
If the Fridge/Freezer is not level, the door and magnetic seal alignment will be affected
and may cause you Fridge/Freezer to work incorrectly. Once the Fridge/Freezer is placed
in its final location, adjust the leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the Fridge/Freezer with a weak solution of bicarbonate of soda. Then