Philco PMD 203 B, Руководство пользователя

Страница: 14 / 37

Copyright © 2020, Fast ČR, a. s. Revision 12/2020
EN - 12
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a 230V 50Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
4. Set required programme and time, then press Start.
5. Once cooking is complete take care removing container as it will be hot.
- The oven light turns on while the oven is working.
- The oven door can be opened at any time during operation.
The oven will automatically shut off.
- Each time a button is pressed, a BEEP will sound to acknowledge the press.
- The oven automatically cooks on full power unless set to a lower power level.
- The display will show nothing when the oven is plugged in. When you open the door, the display is turned
on and beep sounds.
- When the Stop/Clear button is pressed during the oven operation, the oven stops cooking and all
information retained. To erase all information press the Stop/Clear button once more. If the oven door is
opened during the oven operation, all information is retained.
- If the Start button is pressed and the oven does not operate, check the area between the door and door seal
for obstructions and make sure the door is closed securely. The oven will not start cooking until the door is
completely closed or the program has been reset.
Make sure the oven is properly installed and plugged into the electrical outlet.