Philco PLDSI 148 A KING, Руководство пользователя

Страница: 10 / 104

Copyright © 2020, Fast ČR, a. s. Revision 08/2022
EN - 8
p
Installation
Installation area
！
Warning!
• Stability is important to prevent the product from wandering! Make sure the
machine is standing leveled and stable.
• Make sure that the product does not stand onto the power cord.
• Make sure to maintain the minimum distances from the walls as shown in the
picture.
Before installing the machine, the location characterized as follows shall be selected:
1. Rigid, dry, and level surface.
2. Avoid direct sunlight.
3. Sufficient ventilation.
4. Room temperature is above 0°C.
5. Keep far away from the heat sources such as coal or gas burning appliances.
Unpacking the washing machine
！
Warning!
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suffocation ! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packaging.Make sure the small
triangle foam (a) is removed with the bottom packaging together. If not, lay the
unit down on the side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
！
Warning!
• You must remove the transport bolts from the backside before using the product.
Loosen the 4 transport bolts
with a spanner.
Remove the bolts including
the rubber parts and keep
them for future use.
Close the holes using the
cover caps.
w
w
W > 20mm
a