EN - 24
07/2013
Copyright © 2013, Fast ČR, a. s.
PART 9: AUTOMATIC MALFUNCTION DETECTION
SYSTEM
Your washing machine is equipped with a system, which during the washing process continually monitors the
correct progress and in the case of any malfunction takes the necessary remedy measures and will at the same
time inform you about the malfunction.
Error code
Possible cause
Solution
E01
Wash
Rinse
Open washing machine door.
Close the washing machine door. If the
problem continues, turn off the washing
machine, disconnect it from the power
socket and immediately contact the nearest
authorised service centre.
E02
Wash
End
Rinse
Low water pressure or there is
not enough water in the drum
of the washing machine.
Turn on the faucet. Mains water may be cut-
off. If the problem still continuoust, your
machine will stop after a while automatically.
E03
Wash
End
Rinse
The pump is damaged, the
pump fi lter is clogged or the
pump electronics are not work-
ing.
Clean out the pump fi lter.
If the problem persists, contact your nearest
authorised service centre.
E04
Wash
Rinse
There is an excessive amount of
water in the washing machine.
Your machine will discharge water by itself
.
Pursuant to discharging operation, turn off
your machine and unplug it
.
Turn off your
(*) Check the information contained in chapter "MAINTENANCE AND CLEANING".
Unplug
the
machine,
turn
off
the
faucet
and
contact
the
nearest
authorised
service.
faucet
and
contact
the
nearest
authorised
service.
Содержание PLD 1473 F
