Philco PL 1061-5 TL, Руководство пользователя

Страница: 10 / 21

CAUTION! Before you close the
lid of your appliance, make sure
that you close the drum
correctly.
Using detergent and additives
Measure out the detergent and the fabric
conditioner.
Detergent compartments
Detergent compartment for pre-
wash phase.
Detergent compartment for
washing phase.
Compartment for liquid additives
(fabric conditioner, starch).
CAUTION! Do
not exceed the
M
level.
Starting a programme without
the delay start
Press the button .
• The indicator of this button stops to
flash and stays on.
• The programme starts, the lid locks,
the indicator of the current cycle
phase is on.
• The drain pump can operate for a
short time at the beginning of the
washing cycle.
Starting a programme with the
delay start
1. Press the button to set the hours of
delay you want to set.
The indicator of the set delay is on.
2. Press the button :
• The appliance starts the countdown.
• When the countdown is completed,
the programme starts automatically.
You can cancel or change the
set of the delay start before you
press the button .
To cancel the delay start:
1. Press the button to set the appliance
to pause.
2.
Press until the indicator of the set
delay goes off.
Press again to start the programme
immediately.
Cancelling a running
programme
1. Turn the programme knob to position
VYP to cancel the programme and to
deactivate the appliance.
2. Turn the programme knob again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance could
drain the water. in this case,
make sure that the detergent is
still in the detergent
compartment, if not fill the
detergent again.
Stand by
Some minutes after the end of the washing
programme, if you do not deactivate the
appliance, the energy saving status
activates. The energy saving status
decreases the energy consumption when
the appliance is on the standby:
• All indicators go off.
• The indicator of the button flashes
slowly.
29