7
Revison 05/2018
Copyright © 2018, Fast ČR, a. s.
EN
PART 5: HOW TO USE
For the fi rst time to use or if not used for a long time, it is recommended that you fi ll to the maximum level
mark with fresh tap water, boil and empty the kettle at least 2 times to clear kettle of any tiny particles. Do not
drink such water
1. Pull up the lid-handle, and the lid can open;
2. Remove the kettle from the base to the fi lling place. Fill the kettle with desired amount no less than the
minimum and not more than the maximum level .Put back the lid; place the kettle back on the base unit;
3. Put the kettle onto the base, plug onto power, there is a beep sound, all display light on for 2s, then come
to standby stage, kettle shows the real water temperature.
4. At standby stage, press on/off button, display shows 80°C or last selected or activated temperature, kettle
starts boiling, the LED display light on, after water reach to the preset temperature, kettle comes to keep
warm stage.
5. During water boiling stage, press on/off button, the kettle boiling stops and comes to standby stage.
6. Boil water to preset temperature, keep warm for 30min, then kettle comes to off stage.
7. During keep warm stage, press on/off button, the kettle boiling stops and comes to standby stage.
8. During standby and working stage, press “+, -“button, can change the temperature between 35~100°C.
