Copyright © 2019, Fast ČR, a. s.
Revision 11/2019
EN - 10
*
Please remember to disassemble cutting canister/cylinder from the appliance, when changing these accessories.
*
Always keep the mixing bowl in appliance when use any function of the appliance.
Following their sequence shown in picture assemble worm shaft, lead cover,
sausage canister into cutting meat canister; then assemble cutting screw bar
into cutting meat canister clockwise.
Following their sequence shown in picture, assemble worm shaft and noodle
accessory into cutting meat canister, then assemble cutting screw bar into
cutting meat canister clockwise.
Following their sequence shown in picture, assemble worm shaft, lead cover,
and cookies maker accessory into cutting meat canister, then assemble cutting
screw bar into cutting meat canister clockwise.
Align arrow on end of cutting cylinder to the other one on arm, about 45
degree angle, then turn it counter-clockwise to assemble prepared cutting
meat canister into arm front output shown in picture.
Fasten cutting screw bar after cutting meat canister fixed correctly.
Assemble loading tray into cutting meat canister then place another bowl or
container under the outlet of cutting meat canister.
Turn control switch to appropriate speed then put food into feeding inlet with
pusher to push down food.
