9
Revison 05/2018
Copyright © 2018, Fast ČR, a. s.
EN
PART 8: TROUBLE SHOOTING
TROUBLE
POTENTIAL CAUSES
RESOLUTION
Power indicator
not on
Power cord is not connected
Please ensure the plug inserted into the socket
Power off
automatically
1. Spare parts over heat
2. No operation in two hours
3. Air intake and/or outlet is
jammed.
Restartujte spotřebič
Prosím, vraťte k opravě do servisního místa
Odstraňte všechny předměty blokující přívod
i odvod vzduchu
LED shows E0
No pot or pot too small
Put the suitable pot on the surface of the cooker
LED shows E1
Voltage is too low
Please ensure 88V < voltage <270V
LED shows E2
Voltage is too high
Please ensure 88V < voltage <270V
LED shows E3
Surface temperature sensor open
circuit or short circuit
Return it to the service center for checking and
repairing
LED shows E4
IGBT sensor open circuit or short
circuit
Return it to the service center for checking and
repairing
LED shows E5
Pot without water or dry
Start again after the temperature cool down
(Make sure the pot with water)
LED shows E6
IGBT overheat
Please check if the air intake and outlet is
jammed. If not, please return the cooker to the
service center for checking and repairing
LED shows E7
Pot deformed heavily
Please use the suitable pot
Note: If the faults can not be resolved, please do not disassemble the appliance by yourself, but return it to
the service center for repairing. If you disassemble the appliance by yourself, we have the right to make the
warranty invalid. Dangers or other safety accidents caused by this will also be charged to the user.
