10
N
Induction Hob
Using your
To start cooking
1. Touch the ON/OFF key
（
B
）
.
After power on, the buzzer beeps once, all displays
show “ – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. According to the heating zone where the pan is placed, select a relevant zone
select key by pressing
“
”
key (A).The symbol 0. selected will stay fully it.
4. Adjust heat setting by touching the regulating
key(
F
)
control.
• If you don’t choose a heat setting within 1 minute, the Induction hob will
automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
alternately with the heat setting
If
the
display
flashes
This
means
that:
1.
You
have
not
placed
a
pan
on
the
correct
cooking
zone
or,
2.
Pan
is
using
is
not
suitable
for
induction
cooking
or,
3.
Pan
is
too
small
or
not
properly
centred
on
the
cooking
zone.
No
heating
takes
place
unless
there
is
a
suitable
pan
on
the
cooking
zone.The
display
will
automatically
turn
off
after
1
minutes
if
no
suitable
pan
is
placed
on
it.
