Philco PF 2602 NX, Руководство пользователя

Страница: 11 / 32

EN - 9
12/2013 Copyright © 2013, Fast ČR, a. s.
Installing the handles
For easier transport, the handles are supplied separately in a plastic bag and it is necessary to install them.
1. Remove the screw covers on the left side of the door and place them in the plastic bag.
2. Place the handle on to the left part of the door. The axis of the screw holes in the handle and the holes in
the door should be aligned as shown in the picture below.
3. Screw on the handles with the supplied screws found in the plastic bag. Then install the handle covers.
Procedure for switching the door opening direction
You can change the door opening direction - from the left (as supplied by the manufacturer) to the right if the
location of the appliance requires it.
WARNING:
When changing the door opening direction, the appliance must not be connected to the power supply.
Check that you have disconnected the plug of the power cord from the mains power socket.
Tools
8 mm socket wrench Narrow fl at screwdriver
Philips screwdriver 8 mm double-ended wrench
NOTE:
Prior to starting with the change, place the appliance on its back so as to gain access to its underside. Lay
the appliance down on to a soft mat or similar material so that the cooling circuit located in the rear of
the appliance is not damaged.