Copyright © 2020, Fast ČR, a. s.
Revision 01/2021
EN - 7
WARNING!
Run water through the new hose before connecting.
WARNING!
Connect the hose directly to the water inlet tap. The pressure supplied by the tap should be a minimum
of 0.03 MPa and a maximum of 1 MPa. If the pressure exceeds 1 MPa, a pressure relief valve must be fitted
between the connection.
WARNING!
After the connections are made, turn the tap on fully and check for water leaks. Always turn off the water
inlet tap after a wash program has finished.
An Aquastop water spout is available with some models. Do not damage it or allow it to become
kinked or twisted.
Drain Hose
Connect the water drain hose directly to water drain hole or to the sink outlet
spigot. This connection should be minimum 50 cm and maximum 110 cm
from flor plane.
IMPORTANT!
Items will not wash properly if a drain hose longer than 4 m is used.
Содержание PDI 1468 BT
Страница 1: ...Dishwasher OWNER S MANUAL PDI 1468 BT PDI 1468 BTDX ...
Страница 35: ...Myčka nádobí NÁVOD K OBSLUZE PDI 1468 BT PDI 1468 BTDX ...
Страница 69: ...Umývačka riadu NÁVOD NA OBSLUHU PDI 1468 BT PDI 1468 BTDX ...
Страница 106: ...Zmywarka do naczyń INSTRUKCJA OBSŁUGI PDI 1468 BT PDI 1468 BTDX ...