Philco PDI 1468 BT, Руководство пользователя

Страница: 30 / 143

Copyright © 2020, Fast ČR, a. s. Revision 01/2021
EN - 28
AUTOMATIC FAULT WARNINGS AND WHAT TO DO
TROUBLE
CODE
POSSIBLE FAULT WHAT TO DO
F5 Insufficient water
Make sure the water inlet tap is open and water is flowing.
Separate the inlet hose from the tap and clean the filter of the
hose.
Contact service if the error continues.
F3
Continuous water
input
Close the tap and contact service.
F2
Inability to discharge
water
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
F8 Heater error Contact service.
F1 Overflow
Unplug the machine and close the tap.
Contact for service.
FE Faulty electronic card Contact for service.
F7 Overheating Contact for service.
F6 Faulty heater sensor Contact for service.
The installation and repairing procedures should always carried out by the Authorised Service Agent in order
to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures
carried out by unauthorised persons. Repairs may be carried out by technicians only. If a component has to
be replaced, ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts may cause considerable damage and put the user at
considerable risk.
Contact information for your customer service can be found on the back of this document.
Function-relevant genuine spare parts according to the corresponding Ecodesign order can be obtained
from Customer Service for a period of at least 10 years from the date on which your appliance was placed on
the market within the European Economic Area.