Philco PDC 72 Chiva, Руководство пользователя

Страница: 36 / 136

Copyright © 2018, Fast ČR, a. s. Revision 06/2022
EN - 34
8. TROUBLESHOOTING
Your dryer is fitted with systems that continuously perform checks during the drying process to take the
necessary measures and warn you in case of any malfunction.
WARNING: If the problem persists even if you have applied the steps in this section, please contact the
your dealer or an Authorised Service Provider. Never try to repair a nonfunctional product.
PROBLEM REASON SOLUTION
The drying process takes a long time. The surface of the lint filter might be
clogged.
Wash the filter with lukewarm water.
The heat exchanger might be clogged. Clean the heat exchanger
The ventilation grills in front of the
machine might be closed.
Open the doors/windows to prevent
the room temperature from rising too
much.
There might be a layer of limescale on
the humidity sensor.
Clean the humidity sensor.
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your
washing machine.
Laundry comes out damp at the end
of the drying process.
The laundry that comes out hot at the end of the drying process generally feels
more humid.
The programme used might not be
suitable for the type of laundry.
Check the care labels on the laundry
items, select a suitable programme for
the type of laundry and additionally,
use the time programmes.
The surface of the lint filter might be
clogged.
Wash the filter with lukewarm water.
The heat exchanger might be clogged. Clean the heat exchanger
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your
washing machine.
The dryer cannot be opened or the
programme cannot be started. The
dryer does not get activated when
adjusted.
The dryer might not be plugged in. Make sure that the plug is fitted in the
socket.
The loading door might be open. Make sure that the loading door is
properly closed.
You might not have set a programme
or pressed the Start/Pause key.
Make sure that the programme has
been set and the dryer is not in the
Standby (Pause) mode.
Child lock might be active. Deactivate the child lock.