Philco PDC 72 Chiva, Руководство пользователя

Страница: 18 / 136

Copyright © 2018, Fast ČR, a. s. Revision 06/2022
EN - 16
2.2. Adjusting the Feet
• For the dryer to work with less noise and vibration, it must be stable and balanced on its feet. Adjust the
feed to ensure that the product is balanced.
• Rotate the feet to the right and to the left until the dryer is even and stable.
IMPORTANT: Never remove the adjustable feet.
2.3. Electrical Connection
ATTENTION:
There is risk of fire and electric shock.
• Your dryer is set to 220-240 V and 50 Hz.
• The mains cable of the dryer is equipped with a special plug. This plug must be connected to an earthed
socket protected by a fuse of 16 Amperes as indicated on the type plate. The fuse current rating of the
power line where the outlet is connected must also be 16 amperes. Consult a qualified electrician if you
do not have such an outlet or fuse.
• Our company cannot be held responsible for damages resulting from usage without earthing.
IMPORTANT: Operating your machine at low voltage values will shorten the service life and decrease the
performance of your machine.
2.4. Under Counter Installation
• Leave at least 3 cm of space between the side and rear walls of the product and the underside of the
worktop when installing your product under a counter.
• Assembly / disassembly under the counter if neccessary must be done by authorized service.