Philco PDA 1291 BIX, Руководство пользователя

Страница: 14 / 116

EN - 12
08/2012 Copyright © 2012, Fast ČR, a. s.
PART 4: CONTROL PANEL
Control panel
10. 9.
1. 2. 3. 4. 5. 6. 7. 8.
1. ON/OFF button: Turns power to the appliance on/off . After turning on, the Start/Standby indicator light
will come on.
2. Remaining time display: displays the time remaining until the end of the selected washing program.
Furthermore, you can postpone the start of the selected washing cycle by pressing the +/- buttons before
starting the washing cycle. If you wish to change the postponed start time, press the Start/Pause button
and use the +/- buttons to change the time. Then press the Start/Pause button again.
3. Handle
4. Tablet button: use this if you are using 3-in-1 tablets containing washing detergent, salt, rinsing aid.
5. Pre-wash button: use this for heavily soiled dishes to improve the washing cycle results. The temperature
and duration of the washing cycle will change.
NOTE:
If you want to set only the pre-wash program, press the Start/Pause button after making the
selection.
6. Half dish load button: by using the half dish load function you can reduce the washing cycle time and
reduce water and electricity consumption. You can select from three types of programs:
a) If you have half a dishwasher load and the dishes are located in both the racks, press this button
and select the options where both the indicator lights are lit (see the icon at the beginning
of paragraph a)).
b) If you put in half a dishwasher load only into the upper rack, press this button repeatedly until
only the top indicator light is lit (see icon at the beginning of paragraph b)).
c) If you put in half a dishwasher load only into the lower rack, press this button repeatedly until
only the bottom indicator light is lit (see icon at the beginning of paragraph c)).
7. Start/Pause button: press this button to start the washing cycle selected using the program button. The
washing indicator light will turn on. In the off state the indicator light will fl ash.
8. Program selector: select the desired program.