Philco PCH/AG-1000 MF, Руководство по эксплуатации

Страница: 17 / 20

Θερμαντικό σώμα υψηλής απόδοσης 17
Specifications
Model Rated
power,
W
Rated
voltage
Dimensions,
(LxWxH),
mm
Weight,
kg
Manner
of
fastening
Dust and
moisture
protection
Cur-
rent,
A
PCH/
AG-1000
MF
1000/
500
~220–240
V / 50 Hz
460х78х400 3,25 Wall/ floor
installation
IP24 4,3
PCH/AG-
500 MF
500/
250
~220–240
V / 50 Hz
460х78х400 3,25 Wall/ floor
installation
IP24 2,2
Troubleshooting
Defect Symptom Cause Troubleshooting
Does not work 1) The power cable is poorly
plugged.
2) The convector is in standby
mode.
3) The actual temperature in room
exceeds the thermostat setting. 1) Properly plug the cable.
2) Set the convector in operating
mode.
3) Set operating temperature of the
convector.
Burnt dust
smell when the
convector is first
started It is not a defect Smell disappears when the convector
runs for several minutes
If the problem persists after all attempts to remove shortcomings, contact an authorized service
center in your region or sales representative.
and pull the heater forward. The
heater is removed it is possible to
wash the wall.
After cleaning install the heater in
its normal operating position. Recommended room temperature
and humidity:
а) for operation:
From -25 to +30°С, humidity from
40 to 90%;
b) for storage: From -20 to +80°C,
humidity from 40 to 90%.