background image

EN - 8

 12/2013

Copyright © 2013, Fast ČR, a. s.

Cleaning before use

Check that you have removed from the appliance all adhesive tape used to hold accessories . Then clean all the 
inside parts using lukewarm water with a neutral cleaning agent, vinegar or sodium carbonate – in this way 
you will remove the characteristic odour of new parts – then dry carefully. Do not use detergents or aggressive 
agents, which could damage the surfaces.

Electrical connection

Before connecting the power plug to the power socket, check that: 

Your hands are completely dry.
The voltage and frequency shown on the rating label of the appliance corresponds to that in the home power 
grid (permitted tolerance from -6% to +6% for nominal voltage. For use with diff erent voltages, use a voltage 
changer with the corresponding parameters).
The power cord and the plug are not damaged or caught under heavy objects.
The power cord is not excessively tensioned, it is not permitted to use an extension cord.

   Do not connect the appliance to a voltage rectifi er (e.g. solar power plant) or use an extension cord.

  The appliance must be connected to a working grounding lead. 

 

 If the power socket of the home system is not grounded in accordance with the current legal 
regulations, connect the appliance after consulting a  specialised technician to the grounding lead 
itself.

 

 The manufacturer takes no responsibility for injuries caused as a  result of not following these 
instructions.

   If you do not correctly level the refrigerator during the installation, the doors may not close shut and 

seal properly, which may cause problems with the cooling, ice build up or moisture. Levelling the 
refrigerator is very important.

Level the refrigerator using the levelling feet – turn them clockwise to lift the refrigerator and turn them 
anticlockwise to lower the refrigerator.

Содержание PC 1602

























Отзывы: