Philco GH1109S, Руководство пользователя

Страница: 5 / 16

5
external timer or separate remote control system.
● There shall be adequate ventilation of the room when the hood is
used at the same time as appliances burning gas or other fuels.
Ensure that the negative pressure of the installation site does not
exceed 4 Pa (0.04 mbar) to ensure combustion fumes are not
drawn back into the room.
● Do not use the hood if it shows signs of damage or imperfection.
Contact customer services for assistance.
● Switch off the appliance at the mains supply before carrying out
any maintenance work or cleaning.
● CAUTION: Accessible parts may become hot when used with
cooking appliances.
● Do not flambé under the hood. To avoid the risk of fire, clean
or replace the grease filter regularly and closely monitor pans
containing hot oil.
● The manufacturer declines all liability for personal or material
damage as a result of misuse or incorrect installation of this
appliance.
● The appliance is for domestic use only as an extractor hood.
INSTALLATION INSTRUCTIONS
All installation must be carried out by a competent person or
qualified electrician. Before connecting the mains supply ensure that
the mains voltage corresponds to the voltage on the rating plate.
The appliance must be connected directly to the mains using an
omnipolar circuit breaker with a minimum opening of 3mm between
the contacts.
The installer must ensure that the correct electrical connection has
been made and that it complies with the wiring diagram.
Regularly check the power plug and power cord for damage. If the
supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
WARNING: This is a Class II appliance and MUST NOT be
earthed
.