Philco GH1109S, Руководство пользователя

Страница: 13 / 16

13
R eplacing Activated charcoal filters
Replace Activated charcoal every 3 months
3 MONTHS
≤ 65ºC
1 MONTH
Troubleshooting
Problem Possible cause Solution
Excessive vibration. The appliance is not installed
properly on the brackets.
Take down the appliance and check
The fan blade is damaged.
Switch off the appliance. Repair to
personnel only.
The light is on, but the
fan does not work.
The fan blade is jammed.
The motor is damaged.
Both the light and
motor do not work.
Light bulb blown. Replace with a bulb of the
correct rating.
Power connection loose. Check power supply.
Suction
performance reduced.
Speed may be too low. Select a higher speed.
are dirty. Care and maintenance section).
Top vent might be
obstructed.
Clear any obstruction.
Optional vent kit might be twisted. Ensure that the vent kit
manufacturer’s instructions.
The installation may not comply with
the manufacturers instructions.
The vent hose should be correct
diameter throughout with no
reductions or restriction.(See
installation section).
Works normally but
cooking smells linger. recirculation mode or is full
of grease. maintenance section).