Water drainage hose
Connection of power supply
ʎ
The height of the terminal of the water drainage hose should
be between 80cm-100cm, the water drainage hose must be se-
curely placed on the clip on the back of the washing machine.
ʎ
Use the water drainage support supplied as an accessory for
proper installation of the water drainage hose .fix the water drain-
age hose support with waterproof sring.Do not use an excessively
long water drainage hose and contract the authorized technician
if the water drainage hose needs to be extended.the water drain-
age hose should not be extended more than250cm.(longer ex-
tension will result in concurrent water inflow and outflow).The
diameter of the extension hose should be the same as the origi-
nal hose.
caution:water drainage hose must not be immersed in water.the
original and extension hoses should be tightly connected .
Installation
Check the following items before connection to the power supply.
ʎ
The socket conforms to the maximun power load(The maximum current load of the socket and
power supply cable should not be less than 15A)
K
ʎ
Power supply voltage conforms to the required value.
ʎ
The power supply socket and the plug of the washing machine compatible,if they are compat-
ible ,Refer to a washing machine technician or a Haier designated service point for power cable
replacement.The washing machine should be connected to an earth before use.
ʎ
Supplementary earth cable should not be necessary if the socket is connected to the earth.
ʎ
Supplementary earth cable should be installed on the upper back of the washing machine
andconnected to an earth if the power supply socket has no earth connection.
80cm
100cm
6
