Insert the bolts.
6. If the machine is to be moved a distance location,
replace the vibration mounting locks which were re-
moved during installation as shown below.
1. Turn of the water and electricity supply
after every wash. Open the door to pre-
vent the formation of moisture and odors.
If the washing machine is left idle for a long
period, drain any remaining water in the
machine and replace the drainage hose.
2. Unplug the machine during cleaning and
maintenance. Use a soft cloth dampened with
soapy liquid to clean the machine case and rub-
ber components. Do not use corrosive or abra-
sive chemicals or solvents.
3. Clean the detergent compartment
regularly. For the detergent compartment
similar to figure (a), raise the compartment
slightly to remove and replace after cleaning.
7. If the washing machine is left idle
for a long period turn off the water and
electricity supply and open the door
slightly to prevent the formation of
moisture and odors.
4. Cleaning the Filter (once a month)
Push out the outer cover (Fig.1);
Remove the filter by turning counterclockwise
(Fig.2);
Flash clean with running water;
Replace the filter by turing clockwise and remount
the cover(Fig.3).
Caution:
Fig.1
Remove the back
cover
.
Replace the rubber
plugs.
Fig.2
Fig.3
Fig (a)
5. To prevent block-
ages to the water sup-
ply or the ingress of
contaminants, clean
the water inlet and in-
let water filter regularly.
Replace the back
cover
.
Tighten the bolts with the
spanner provided.
Maintenance
13
The filter must be in place,or it may lead
to leakage.
