2-G
2-J
2-H
2-K
2-I
2-L
Securing your baby
2.3 Adjusting the shoulder height
• The harness has 3 height positions. The straps should
go into the slots nearest to the top of your child's
shoulders. If your child's shoulders are between two
pairs of slots, always use the higher position.
• Loosen the shoulder belts by pressing the release
button and pulling the shoulder belts as far as you
can. NOTE: DO NOT PULL THE BELT PADS (2-G)
• To adjust the shoulder straps of the harness,
remove one of the shoulder straps from the metal
retaining yoke located at the back of the seat.
Leave the other one in place for reference (2-H).
• Pull the shoulder straps through the harness slot in
the shell and cover, then pull through the shoulder
pad (2-I).
• Pull shoulder pad back through harness slot in cover
and shell, and re-locate to desired harness slot (2-J).
• Feed the shoulder strap back through the shoulder
pad, then through the same slot, and re-attach to
metal yoke at rear (2-K).
• Repeat the same procedure for the shoulder strap
and pad on the other side, Make sure there are no
kinks or twists in the straps (2-L).
