11
2-A
B
-
2
C
-
2
E
-
2
D
-
2
2-F
Securing your baby
2.1 Securing the harness
• Place the right hand harness connector behind the
left hand one, they should slot together neatly (2-A).
• Push the harness ends into the hole in the
buckle at the top of the crotch strap (2-B).
• You will hear and feel a 'CLICK' when it is
secure, check by attempting to remove the
connectors by pulling the webbing above and
below the buckle, periodically check that your
child has not released the buckle (To release
the harness, press the red button down) (2-C).
2.2 Securing the harness
• Pull gently on the harness adjuster to take up any slack
(2-D). A loose harness is dangerous, so it should be
checked every time the seat is used. It is recommended
that there is just enough room to insert two fingers
between the shoulder straps and the child's chest (2-E).
• If the harness is too tight, loosen it by first pressing
the tab at the front of the seat, and then pulling both
straps, as shown. Do not pull on the shoulder pads,
as these are fixed in length (2-F)
11
