User Manual_POE60S-4AF
Power over Ethernet Midspan
POE60S-4AF User Manual
BERGER Stromversorgungen GmbH & Co. KG
Am Eiskellerwald 22
77855 Achern
Germany
www.berger-stromversorgungen.de
Tel.: +49 (0)7841-67304-0
Fax: +49 (0)7841-67304-29
FAQ and Troubleshooting
Can I use this device with equipment that is not
PoE ready?
No, this device will not act as a splitter to divide the
data over Ethernet and power via a DC cable. There
is a list of available splitters available on the website
www.berger-stromversorgungen.de This unit may act as
a data switch to relay data only over 100 meters.
Can I connect multiple devices to extend my reach
beyond 200 meters?
Yes it is possible to add more than one device to
extend the reach of PoE; however only one can be
a POE61S-4AF and it must be connected directly
into the Ultra or Mega PoE midspan power injector.
To extend the connection an additional 100m to 300
or more, then Phihong recommends the POE16S-
1AFG extender which will be available in the fi rst
half of 2010. Since the POE60S-4AF has an internal
signature resistance at 12.5K and its output must
detect 25K signature resistance, the device will
not work if connected to another POE61S-4AF or
POE60S-4AF.
If your question is not listed here and need further information
please contact Phihong Sales. For a full listing of available contact
information please visit the Contact Us section of the Berger
Stromversorgungen website www.berger-stromversorgungen.de
Features
Input
Phihong Ultra (75W)
or Mega PoE (95W)
or optional DC Power
Adapter
Output
4 Ports at 15.4W max.
per port; IEEE802.3af
compatible
Ease of Installation
DHCP Detection
Safety Approval
CE Certifi ed
Troubleshooting
Detection:
Once a compliant load is attached to the input and
output RJ45 connectors, the Green LED for POWER
IN will illuminate as well as the POWER OUT LED
for each connected port indicating that the power is
connected. If data is being transferred then a yellow
LED will blink for DATA IN and under each connected
port. A 100M Data Rate and Full Duplex will yield
Green LEDS for DATA in and DATA OUT for each
connected port. The LEDs will not illuminate if Half
Duplex or 10M Data Rate. Should the load be non-
complaint all LEDs will remain off.
Phihong is not responsible for any error, and reserves the right to
make changes without notice.
