150Mbps Wireless N Router
www.phicomm.com
42
Chapter 3: Router Configuration
Static Routing Table
Static routes give the router information that it cannot learn automatically through other means
Use the Static Routing page to add or delete a route. The max number is 10.
Destination:
This is the IP address of the network or host that you want to assign to a static
route.
Subnet Mask:
The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Gateway:
This is the IP address of the default gateway device that allows for the contact
between the Router and the network or host.
Click
Add
button, you can add a routing rule.
Dynamic Routing Settings
RIP:
The Routing Information Protocol (RIP) is a dynamic routing protocol used in local and wide
area networks. Choose
Enable
dynamic routing need to be activated.