150Mbps Wireless N Router
www.phicomm.com
29
Chapter 3: Router Configuration
WPS Settings
The WPS function can help you add a new device to the network quickly. If the client device
supports Wi-Fi Protected Setup and is equipped with a WPS button, you can add it to the
network by pressing the WPS button on the device and then press the button on the router
within two minutes. The status LED on the router will light green for five minutes if the device
has been successfully added to the network; If your client asks for the Router’s PIN number, enter
the router’s PIN number into your client device; If your client device has a WIFI Protected Setup
PIN number, enter that number in the PIN box.
WPS (Wi-Fi Protected Setting):
Easy and quick to establish the connection between wireless
network client and the router through encrypted contents. The users only enter the PIN code to
configure without selecting encryption method and entering secret keys by manual.
WPS Mode:
Supports two ways to configure WPS settings: PBC (Push-Button Configuration) and
PIN code.
PBC:
Select the
PBC
button or press the WPS button on the panel of the Router. (Press WPS
button and WPS LED will blink, which means the WPS function is enabled. During the blinking
time, press the WPS button on another network device, WPS LED light will become solid when
the connection succeeds.)
