background image

                                                        

 

 

 

150Mbps Wireless N Access Point 

www.phicomm.com

 

36

 

Appendix B: Certification

  

 

Appendix B: Certification 

FCC Statement

 

 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more 
of the following measures:   

• 

Reorient or relocate the receiving antenna.   

• 

Increase the separation between the equipment and receiver.   

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected.   

• 

Consult the dealer or an experienced radio/ TV technician for help.   

• 

Changes or modifications to this unit not expressly approved by the party responsible for 
compliance could void the user’s authority to operate this equipment.   

FCC Caution

 

• 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired 
operation.   

• 

For product available in the USA market, only channel 1~11 can be operated. Selection of 
other channels is not possible.   

• 

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 
environment. 

• 

This device and its antenna(s) must not be co-located or operation in conjunction with any 
other antenna or transmitter.   

Содержание FWA-600ND














































Отзывы: