150Mbps Wireless N Access Point
www.phicomm.com
35
Appendix A: Troubleshooting
Appendix A: Troubleshooting
1.
How do I restore the Wireless Access Point to factory default settings?
When the Wireless Access Point is powered on, press and hold the reset button on the rear
panel for 8~10 seconds, after all the lights start flashing, release it.
2.
What can I do if I forget my password?
Restore the wireless Access Point to factory default settings. If you do not know how to do it,
please refer to the answer for question 1.
Use the default username and password: admin, admin.
Reconfigure the wireless Access Point since you have ever reset it.
3.
I cannot login the web management page.
Check the computer’s IP address, make sure the IP address is correct, for details please refer
to the section of Configure the Computers IP Address in this manual.
Make sure you put 192.168.0.254 into the address bar, not the search bar.
Check your web browser, make sure the Proxy server is unchecked. Take Internet Explorer as
an example, go to Tools>Internet Options>Connections>LAN Settings, uncheck Use a
proxy server for your LAN.
If it tells you the username or password is error, and you cannot remember the new one,
please reset router by pressing reset button for at least 6 seconds, and then try to login with
default username and password (admin/admin).
