PHICOMM FIR151B Скачать руководство пользователя

Страница: 4 / 49

page

LIMITATION OF DAMAGES

To the maximum extent permitted by applicable law, in no event shall Shanghai Feixun

Communication Co., Ltd. be liable for any special incidental, indirect or consequential

damages or lost profits, business, revenue, data, goodwill or anticipated savings. The

maximum liability (this limitaion shall not apply to liability for personal injury to the

extent applicable law prohibits such a limitation) of Shanghai Feixun Communication Co.,

Ltd. arising from the use of the product described in this document shall be limited to

the amount paid by customers for the purchase of this product.

IMPORTANT HEALTH INFORMATION AND SAFETY PRECAUTIONS

When using this product, the safety precautions below must be taken to avoid possible

legal liabilities and damages. Retain and follow all product safety and operating

instructions. Observe all warnings in the operating instructions on the product.

To reduce the risk of bodily injury, electric shock, fire and damage to the equipment,

observes the following precautions.

SAFETY PRECAUTIONS FOR PROPER INSTALLATION

CAUTION:

Connecting to a weaker inappropriate charger can result in an electric shock

to your device.

SAFETY PRECAUTIONS FOR PROPER SUPPLY UNIT

Use the correct power source!

This product can only be charged with matching standard external power source

appointed by Shanghai Feixun Communication Co., Ltd.

Shanghai Feixun Communication Co., Ltd. is not liable for any device breakdown or

safety accident arising from the use of unauthorized external power source.

PRECAUTION OF HEARING LOSS

GENERAL WARNING:

To prevent possible hearing damage,

do not listen at high volume levels for long periods.

Permanent hearing loss may occur if the receiver, headphones, speakerphone or

earpieces are used at high volume. Use only compatible receivers, headphones,

speakerphones or earpieces with your device. Turn on the audio and check the volume

before inserting anything in your ear. You can adapt over time to a higher volume of

sound that may sound normal but can be damaging to your hearing. If you experience

ringing in your ears or muffled speech, stop listening and check your hearing. The louder

the volume, the less time is required before your hearing could be affected.

Содержание FIR151B














































Результаты поиска

Содержание FIR151B

Отзывы:

Похожие инструкции для FIR151B

Бренды по названию

Популярные бренды

PHICOMM FIR151B, Руководство пользователя

Результаты поиска

Содержание FIR151B

Отзывы:

Похожие инструкции для FIR151B

Бренды по названию

Популярные бренды