Copyright @ 2014 Phicomm Europe GmbH – print only for private use!
page
16
of
49
4. Wireless router configurations
This section gives instructions of the procedures that must be performed to enable
the wireless router.
After completion of the third point the router is connected with the internet. Please
select the corresponding internet connection on your PC and click
connect
.
4.1 TCP/IP settings
The IP address has to be obtained automatically before starting the configuration of
the router. Please follow these steps:
1.
With the right mouse button please click on the right bottom corner. Click
Open
Network and Sharing Center
and select
Change adapter settings
on the upper left of
the screen.
2.
Select network connection type and open the
Properties
. In the
Properties
window
please double click
Internet Protocol Version 4 (TCP/IPv4)
.
