HEARING AID DEVICES
Some devices may interfere with some hearing aid devices. In the
event of such interference, you may want to consult your service
provider, or call customer service line to discuss alternatives.
NON-IONIZING RADIATION
Your device has external antennas. This product should be
operated in its normal-use position to ensure the radiative
performance and safety of the interference. Users are advised that
for satisfactory operation of the equipment and for the safety of
personnel, it is recommended that no part of the human body be
allowed to come too close to the antenna during operation of the
equipment.
Use only the supplied antennas. Use of unauthorized or modified
antennas may impair transfer quality and damage the device,
causing loss of performance and SAR levels exceeding the
recommended limits as well as result in noncompliance with local
regulatory requirements in your country.
To assure optimal device performance and ensure human exposure
to RF energy is within the guidelines set forth in the relevant
standards, always use your device only its normal-use position.
Contact with the antennas may impair quality and cause your
device to operate at a higher power level than needed. Avoiding
contact with the antenna area when the device is in use optimizes
the antenna performance.
GENERAL PRECAUTIONS
AVOID APPLYING EXCESSIVE PRESSURE TO THE DEVICE
Do not apply excessive pressure on the device to prevent damaging
them.
DEVICE IS GETTING WARM AFTER PROLONGED USE
When using your device for prolonged periods the device may
become warm. In most cases this condition is normal and therefore
should not be interpreted as a problem with the device.
HEED SERVICE MARKING
Except as explained in the user manual, do not repair any product
yourself. Service needed on components inside the device should
be done by an authorized service outlet or provider.
PHICOMM is entitled to use new or reconditioned replacements
parts or boards for repairs under warranty, provided they have the
same functionality as the parts to be replaced.
DAMAGE REQUIRING SERVICE
Unplug the device from the electrical outlet and refer servicing to an
authorized service center or provider under the following conditions:
•
Liquid has been spilled or an object has fallen onto the product.
•
The product has to been exposed to rain or water.
•
There are noticeable signs of overheating.
•
The product does not operate normally when you follow the
operating instructions.
AVOID HOT AREAS
The product should be placed away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that products heat.
AVOID HOT AREAS
Never use the product in a wet location.
AVOID USING YOUR DEVICE AFTER A DRAMATIC CHANGE IN
TEMPERATURE
When you move your device between environments with very
different temperature and/or humidity ranges, condensation may
form on or within the device. To avoid damaging the device, allow
sufficient time for the moisture to evaporate before using the device.
NOTICE:
When taking the device from low-temperature conditions
into a warmer environment or from high-temperature conditions into
a cooler environment, allow the device to acclimate to room
temperature before turning on power.
AVOID PUSHING OBJECTS INTO THE DEVICE
Never push objects of any kind into cabinet slots or other openings
in the product. Slots and openings are provided for ventilation.
These openings must not be blocked or covered.
MOUNTING ACCESSORIES
Do not use the product on an unstable table, cart, tripod or bracket.
Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended
by the manufacturer.
AVOID UNSTABLE MOUNTING
Do not place the product with an unstable base.
USE PRODUCT WITH APPROVED EQUIPMENT
This product should be used only with personal computers and
options identified as suitable for use with your equipment.
CLEANING
Unplug the product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning,
but NEVER use water to clean the device.
The device has been provided with special treatments featuring that
it could dispose dirt and sweat on its surface. The device itself does
not have a stain-resistant function. In case of smudginess and
dyeing, please wipe it with clean damp sponge immediately. Please
keep the device dry when necessary.
PACEMAKER
The device may cause disturbance to pacemakers.
Please keep the device a proper distance of at least 5
centimeters away from pacemakers. If you need
detailed information about other active implantable
medical devices, please consult your doctor to ensure the magnetic
interference of such active implantable medical devices.
CAUTION
Update your operating system with caution.
•
Improper operation or unforeseen external factors may
cause an operating system update fails; the device will not
work properly. If such a situation occurs, you need to send
the unit in for repair.
•
An unofficial operating system can cause security risks.
Please install only official updates provided by Phicomm, if
not you will void the warranty and a repair is chargeable.
SW-Update
•
During the update process all user data will be erased. Please
backup your data before.
For detailed product information please visit our website:
www. phicomm.com/de GERMAN
www.phicomm.com/eu
ENGLISH
