PHENYX PRO PAS-225, Руководство пользователя

Страница: 6 / 12

6
®
400-950MHZ
LOW NOISE
RE AMPLIFIER
dB
dB
400-950MHZ
LOW NOISE
RE AMPLIFIER
dB
dB
Operation Instructions
Setup
1.Connect the directional antenna to the tripod stand.
2.Use cables to connect the antennas to the PAS-225 receiver’s antenna input ports.
3.Put the two antennas at least 1.5 meter away from each other and the they should
be higher than 1.8 meters. Also make sure there aren't any obstacles in the line of
sight of the antennas (including audience)
4.Face the antenna towards the microphone/performers for the best signal stability.
5.Connect the antenna outputs from the PAS-225 receiver to the antenna inputs of
the wireless microphone systems that you want.
6.Turn on the wireless microphone systems and the PAS-225 system and they are
ready to go.
400-950MHZ
LOW NOISE
RE AMPLIFIER
dB
dB
(Picture 1: O correct) (Figure 2: X error)